Experimental investigation on the effect of ambient pressure on thermal runaway and fire behaviors of lithium‐ion batteries

To investigate the impacts of ambient pressure on thermal runaway and fire behaviors of lithium‐ion battery (LIB), experimental measurement and theoretical analysis with serial conditions are conducted at two altitudes. The well‐designed experimental equipment and operating conditions have enabled the accurate evaluation of ambient pressure effects. Results show that the first abrupt temperature change in Hefei (ambient pressure 100.8 kPa) is higher than that in Lhasa (64.3 kPa). The difference in ambient pressure at two altitudes leads to different relief valve crack temperature and time. The average burning rate in Hefei is larger than that in Lhasa, and the estimated pressure effect factor is quite different for detailed pack conditions and varies within the range of 0.083‐1.39. The ambient pressure has a greater effect on the heat release rate and total heat release than the mass loss, and the effective combustion heat under the low pressure is lower than that in normal condition. This work can provide more comprehensive and useful data for the safety management of LIBs at low pressure environments.     

Performance indices of a common rail-system CI engine powered by diesel oil and biofuel blends

Conventional fuels used for supplying internal combustion piston engines include petrols and diesel oils produced from petroleum. These are a non-renewable energy source. The environmental policy of the European Union is geared towards increasing the share of renewable fuels in the overall energy consumption. An alternative fuel originating from a renewable source, which could be used for feeding self-ignition internal combustion engines are the fatty acid methyl esters (FAME) of plant oils. The paper reports selected results of testing a 1.3 MULTIJET SDE 90 PS self-ignition engine with the Common Rail reservoir feed system supplied with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME). Tests were carried out on an engine test bed equipped with an eddy-current brake. The purpose of the tests was to determine the economic–energy and ecological indices of engine operation. The concentrations of exhaust gas gaseous components were measured using a MEXA-1600DEGR analyzer, while the particulate concentrations, with a MEXA-1230PM analyzer. In addition, the variations of working medium pressures in the engine chamber and of fuel pressure upstream the injector were recorded as a function of crankshaft rotation angle using the AVL IndiSmart 612 indication system for this purpose. The physicochemical properties of fuels used in the tests were determined using a fuel analyzer. The obtained testing results made it possible to determine and assess the operation indices of the engine fed with mixtures of diesel oil and rape oil fatty acid methyl esters (FAME) with slightly higher ester contents than the requirements of the currently applicable diesel oil standard.     

基于静电喷雾法萝卜硫素微胶囊的制备与表征

使用静电喷雾法制备不同壁材的萝卜硫素（sulforaphane，SF）微胶囊，通过表征微胶囊表面形貌、分子间相互作用、热行为、体外释放情况以及在高温下的贮存稳定性，研究食品级聚合物对SF的微胶囊化作用，从而筛选出适合静电喷雾包封SF的壁材。结果表明，微胶囊平均粒径在427.80～1 857.04 nm之间，呈球状，表面光滑。相比壳聚糖，玉米醇溶蛋白（Zein）和明胶（gelatin，Gel）是更有效的SF递送载体，Zein-SF、Gel-SF的包封率分别为（95.83±2.37）%、（95.11±2.82）%。傅里叶变换红外光谱确认了SF微胶囊中SF的存在；热重分析结果显示SF微胶囊在300 ℃的高温下才大量降解，有较高的热稳定性。SF微胶囊在模拟胃肠液和食物基质的最终释放率在80%～90%之间，具有良好的胃肠溶解和释放性能；同时，微胶囊化处理后的SF耐热性显著提高。本研究结果有助于进一步开发SF递送载体，促进其产业化应用。     

Facile fabrication of hollow mesoporous bioactive glass spheres: From structural behaviour to in vitro biology evaluation

Bone defects accompanied by infection or inflammation can significantly delay the healing process. To simultaneously achieve controlled release of local antibiotics for infection control and bone healing, bone-implantable delivery systems have been considered as a promising strategy. This study aims to improve drug loading capacity of bone-implantable delivery systems by introducing hollow structure mesoporous bioactive glass nanospheres (HMBGs) through a sol–gel process. Particularly, such core–shell bimodal-porous structured nanoparticles were prepared through a sacrificing template using cetyltrimethylammonium bromide (CTAB) as surfactant. It was found that varying the amount of CTAB during the synthesis process is a simple and effective approach for tuning the particle size, morphology, and structure of HMBGs. For in vitro drug release, HMBGs could sustain storage and release of vancomycin hydrochloride (VAN) via diffusion-controlled mechanism, thereby inhibiting the bacteria growth in the subsequent bacterial study. Moreover, HMBGs incorporated with VAN provided a biomimetic microenvironment favored by cell adhesion and proliferation. These findings support the compatibility of HMBG nanoparticles with antibiotics and their potential application in the treatment of infectious bone defects.     

Encapsulation of Synthesized Plant Growth Regulator Based on Copper(II) Complex in Chitosan/Alginate Microcapsules

A new copper complex, trans-diaqua-trans-bis [1-hydroxy-1,2-di (methoxycarbonyl) ethenato] copper (abbreviation Cu(II) complex), was synthesized and its plant growth regulation properties were investigated. The results show a sharp dependence of growth regulation activity of the Cu(II) complex on the type of culture and its concentration. New plant growth regulator accelerated the development of the corn root system (the increase in both length and weight) but showed a smaller effect on the development of the wheat and barley root systems. Stimulation of corn growth decreased with increasing Cu(II) complex concentration from 0.0001% to 0.01% (inhibition at high concentrations—0.01%). The development of corn stems was also accelerated but to a lesser extent. Chitosan-coated calcium alginate microcapsules suitable for delivery of Cu(II) complex to plants were prepared and characterized. Analysis of the FTIR spectrum showed that complex molecular interactions between functional groups of microcapsule constituents include mainly electrostatic interactions and hydrogen bonds. Microcapsules surface exhibits a soft granular surface structure with substructures consisting of abundant smaller particles with reduced surface roughness. Release profile analysis showed Fickian diffusion is the rate-controlling mechanism of Cu(II) complex releasing. The obtained results give new insights into the complexity of the interaction between the Cu(II) complex and microcapsule formulation constituents, which can be of great help in accelerating product development for the application in agriculture     

Novel preparation approach with a 2-step process for spherical particles with high drug loading and controlled size distribution using melt granulation: MALCORE®

A novel approach for preparing drug-containing particles (DCPs) with controlled size distribution and high drug loading was developed using melt granulation. This approach comprises two steps. First, melting component adsorbed particles (MAs) were prepared by mixing and heating the melting components with a porous carrier using a high shear granulator. Second, DCPs were prepared by layering the drug on MAs using a fluidized bed rotor granulator. The time taken for both steps was within 30 min. Adding the polymer in the second step remarkably increased the viscosity of the mixture of melting components and the polymer. Therefore, DCPs could be successfully loaded with a high amount of drug (70% w/w). The particle size distribution of the DCPs was narrow, and it depended on that of the MAs. The flowability of the DCPs was excellent, and the sphericity was close to 1. A unique particle formulation mechanism was suggested based on the observation of DCPs using scanning electron microscopy. The manufacturing time and DCP characteristics were not affected by the manufacturing scale. In conclusion, we have successfully developed a highly efficient novel approach for preparing optimal DCPs through melt granulation, named “Melt Adsorption and Layering with Porosity Core” (MALCORE®).     

Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

Enhanced efficiency fertilisers: a review of formulation and nutrient release patterns

Fertilisers are one of the most important elements of modern agriculture. The application of fertilisers in agricultural practices has markedly increased the production of food, feed, fuel, fibre and other plant products. However, a significant portion of nutrients applied in the field is not taken up by plants and is lost through leaching, volatilisation, nitrification, or other means. Such a loss increases the cost of fertiliser and severely pollutes the environment. To alleviate these problems, enhanced efficiency fertilisers (EEFs) are produced and used in the form of controlled release fertilisers and nitrification/urease inhibitors. The application of biopolymers for coating in EEFs, tailoring the release pattern of nutrients to closely match the growth requirement of plants and development of realistic models to predict the release pattern of common nutrients have been the foci of fertiliser research. In this context, this paper intends to review relevant aspects of new developments in fertiliser production and use, agronomic, economic and environmental drives for enhanced efficiency fertilisers and their formulation process and the nutrient release behaviour. Application of biopolymers and complex coacervation technique for nutrient encapsulation is also explored as a promising technology to produce EEFs. © 2014 Society of Chemical Industry     

Applying fractography and fracture mechanics to the energy and mass of crack growth for glass in the mirror region

The mirror region following the fracture initiation site is considered by applying fracture mechanics principles along with experimental observations of the crack velocity at the formation of the mirror mist boundary. Several issues regarding this crack growth in glass are addressed after considering the terminal velocity of crack growth and the mirror mist boundary information on silicate glasses. A strain energy release rate criterion is applied to estimate the kinetic energy of an advancing crack in glass at the mirror/mist boundary. This energy is then utilized to estimate the effective mass of the crack at the mirror/mist boundary. It is compared with material volumes in the vicinity of the crack.     

Towards controlled cationic polymer growth from inorganic oxide defects: Directing the mechanism of polystyrene grafting from γ-irradiated silica

Most studies on surface-initiated controlled polymerizations for the synthesis of polymeric covalent organic-inorganic hybrid materials focus on chemical methods requiring specific modifications of the inorganic substrate. Few mechanistically-aware approaches have been undertaken towards exploiting the reactivity of defects induced by physical techniques such as ionizing radiations or UV–Vis light. Within this framework, we take grafted polymerization of styrene from γ-irradiated silica as a mechanistic testing ground where para- and diamagnetic silica defects are present, and polymerization proceeds through both radical and cationic mechanisms, resulting in a bimodal molecular weight distribution. We show that these mechanistic intricacies can be sorted out by resorting to the chemical arsenal developed in the last decades for controlled polymerizations. Specifically, we obtained a silica-polystyrene grafted material by cationic grafting from at 30 °C, a unimodal molecular weight distribution, and a relatively high molecular weight (Mn = 7.4 kDa) with a PDI of 1.68.